Warm White & RGBW
Warm White LED Lights
With Full Color Built In
Every Gemstone Lights® light pairs red, green and blue with its own warm-white diode. These warm white LED lights look like soft evening light on North Atlanta brick and siding, and full color is still there for the holidays.
Why it matters
A Dedicated Diode for Warm White
Most color-changing LEDs make white by mixing red, green and blue. The result tends to come out cold or slightly tinted, which is fine on a snowy Christmas card and less flattering on a house. Plenty of lights sold as warm white end up either too blue or too yellow.
Gemstone Lights add a fourth diode just for warm white, at 2800K to 3000K. That is the soft, slightly golden tone of a porch light, and it shows a home’s materials the way you see them in daylight. Red brick reads warm, painted siding keeps its texture, and white trim stays crisp instead of turning blue.
Warm white LED lights built this way suit soft ambient light every month of the year. See how they trace a roofline on the architectural lights page.
Lights Off, Lights On
Drag the handle to compare the same home at dusk, first with its roofline lights off and then switched on.
RGB, RGBW and RGBWW Explained
The letters name the diodes inside each LED. The last W is the one that matters for a warm glow.
| RGB | RGBW | RGBWW (Gemstone Lights) | |
|---|---|---|---|
| Red, green and blue diodes | Yes | Yes | Yes |
| A separate white diode | No | Yes | Yes |
| True white without mixing colors | No | Yes | Yes |
| Dedicated warm-white diode (2800K–3000K) | No | No | Yes |
| Used in every Gemstone Lights product | No | No | Yes |
RGBW adds a white diode; RGBWW makes that diode warm white specifically. We say RGBW in the page title because it is the term most people search for.
Inside each light
Three LEDs, Twelve Diodes
Each Gemstone Lights track light holds three LEDs, and each LED has four diodes: red, green, blue and warm white. Twelve diodes per light is what lets the system mix more than 16 million colors on roofline track and flood lights, while still producing a clean warm white on its own. Patio and deck lights offer over 14 million colors, also with a dedicated warm-white diode in every light.
Brightness runs from 0 to 100 percent, for the whole house or light by light. Dimming individual lights is how you balance a bright gable against a shaded porch, or give a stone front some shadow and depth.
The architectural warm white folder in the pattern library is a customer favorite, and a good place to start.
Christmas
Warm White Christmas Lights, Without the Ladder
A warm-white roofline is the classic Christmas look. With a dedicated warm-white diode you get that traditional glow without the bluish cast many LED strings have.
Because the same lights handle color, you are not locked in. Run warm white all December, switch to red and white for a candy-cane week, or go full multicolor on Christmas Eve, then return to everyday warm white in January.
See the holiday options on the permanent Christmas lights page, or how the same system works every other month on year-round lighting.
Light and Color Specs
Dedicated Warm White
Every light pairs red, green and blue with its own warm-white LED, so white light looks natural instead of tinted.
Warm White at 2800K–3000K
The warm-white glow sits between 2800K and 3000K, the soft tone most homes use every evening.
Millions of Colors
Over 16 million colors on track and flood lights, and over 14 million on patio and deck lights.
Three LEDs per Light
Each track light holds three LEDs, every one with red, green, blue and warm-white diodes.
Dimmable 0–100%
Dim from full brightness down to a faint glow, for the whole system or light by light.
Individually Addressable
Set every light on its own to pick out peaks, the front door or a walkway.
Warm White & RGBW FAQs
The warm-white glow sits between 2800K and 3000K. That is the soft, slightly golden range most people picture when they think of a welcoming porch or a traditional Christmas roofline.
RGBW lights add a white diode to red, green and blue, which gives a truer white than RGB alone. RGBWW lights make that extra diode warm white. Gemstone Lights use RGBWW, so warm white comes from its own diode instead of being mixed.
Yes. The red, green and blue diodes are in every light as well, so you can mix crisper, cooler whites in the app when you want them and go back to warm white afterwards. Brightness is adjustable from 0 to 100 percent.
It should not. Gemstone set out to offer a true warm white, avoiding both the cold blue of many LEDs and the yellow tint of others. If you want it softer still, dim the lights or individual sections in the app.
Yes. Every Gemstone Lights product pairs full color with a dedicated warm-white diode, including patio lights, deck lights and flood lights, so everything matches when it runs from one app.
Keep exploring
See What This Could Look Like
on Your Home
Tell us a little about your home, and we'll help you understand what a professionally installed Gemstone Lights system could look like for your space.
Thanks — your request is in. A specialist will be in touch shortly.